Kustom Grit Step 1

Kustom Grit Superfine abrasive is rated at 50,000 Grit

170mls of Kustom Grit Superfine Abrasive

Kustom Grit Step 1: After sanding to desired grit, apply Kustom Grit Step 1 with paper towel or cloth to the work piece.

Use a cloth or Buffing pad to work the product into the piece.

After buffing use a clean piece of paper towel or cloth to wipe any excess Kustom Grit from the work piece before moving onto Kustom Grit Step 2 as Step 2 is a finer grade grit.

For best results sand to the highest grit before using

Kustom Grit. 2000 Grit will give a glass like finish.

Great results are achieved anywhere from 400 Grit.

Using a buffing pad will give the best finish. We recommend the yellow foam velcro application pads available separately. However, Kustom Grit can be applied by hand.

Kustom Grit Can be used for Lathe work. Recommend using Low RPM between 400 to 800

Vegan alternatives also available.